DPF light on? Car in limp mode, blowing black smoke or running rough? Most of these faults have a cause that can be fixed. We find it, clean or repair it, and test the car before you collect it.
A diesel particulate filter (DPF) traps soot from the exhaust. When it fills up, the car burns the soot off in a process called regeneration. Short journeys and sensor faults stop that from happening, and the filter clogs.
The exhaust gas recirculation (EGR) valve sends a small amount of exhaust back into the engine to cut emissions. Carbon builds up over time and the valve sticks, which causes rough running, smoke and warning lights.
The two systems affect each other. A sticking EGR valve can load the DPF with soot, and a blocked DPF can upset how the engine runs. Fixing one without checking the other often means the fault comes back.
Understanding the cause is how we stop it happening again.
Pressure and temperature sensors tell the car when to regenerate. A bad reading can stop the process or start it at the wrong time.
Soot and oil deposits clog the EGR valve and its passages, so the valve sticks open or shut.
Diesels with a DPF need the correct low-ash oil. The wrong oil clogs the filter sooner.
We read the fault codes and live data, check the pressure sensors and see how regeneration is behaving.
That might be a forced regeneration, a clean, a sensor, an EGR valve clean or replacement. A new DPF is the last option, not the first.
You get a clear price first. Then we carry out the work and fix any underlying fault that caused the blockage.
We road test, confirm the system is regenerating and give you advice that keeps the problem from returning.
Tell us what the vehicle is doing. You will get honest advice, a clear price and the earliest slot we have.
It depends on the vehicle and what has actually failed. We diagnose first, then give you the options and prices before any work starts.
WhatsApp us